G U A R A N T E E

Items listed in a black box like this one are EARTH TOOLS Exclusives!

YOUR SOURCE FOR
bcs tillers, bcs sickle bars, bcs lawn mowers, bcs snowblowers, bcs brush mowers, bcs sweepers, bcs chipper / shredder
bcs attachments & bcs accessories
AND
 rotary plows, mini hay balers, hay rakes, spaders, cultivators, flail mowers, seeder, potato digger plow, utility trailers & more!

In 1977, my Father, Victor Dufour, started a home-based small equipment business in Southern Indiana called D & D Enterprises.  One of the three equipment lines the business began with was BCS walk-behind tractors (marketed at that time as “Mainline” brand machines through an importer in Ohio). My Dad was impressed with the quality and versatility of the product, and besides, we needed a good tiller and sickle bar mower!  We used a BCS 715 8hp gas model (equivalent to the 722 of today) to start a small farm, on which we grew the majority of the food to supply our family (Mom, Dad & 7 kids!) and sold organic produce to restaurants for extra income.  This machine broke 5 acres of sod, cultivated, mowed a 17-acre hayfield, cleared snow and ran a sprayer pump.  We put 1700 hours on it in 6 years and spent about $120 in maintenance (mostly tiller tines!).  We then put a new engine on the 715 and sold it (it is still in service; the transmission has never been serviced except for an occasional oil change) and graduated to a model 735 (roughly the equivalent of the 853 today) with a 10hp Lombardini diesel engine equipped with wind-the-rope-on-the-pulley-and-PULL start.  We added a lawn mower implement and a 5-foot Hayrake/tedder to the tractor’s list of chores and put about 2500 hours on this unit over the next 5 years.  The workload was great enough (and the labor pool large enough, with all those kids) that we finally started using two walk-behind tractors simultaneously around 1988 by adding a BCS 604 (front-PTO-only machine, for all our mowing/hayraking applications) to the workforce.

Joel, Wife Chris, & daughters Natalie (7) and Sophie (3.5) ...and Lady the dog.

All this time, our small equipment business was growing too…and having tons of first-hand experience with the equipment enabled Dad to be very successful selling BCS and we quickly became the largest dealer in Indiana.  Dad’s business was also expanding by selling & servicing more equipment lines, mostly in the way of chain saws and logging supplies, since Southern Indiana is a fairly large hardwood-lumber-producing area.  Even though our business was located “out in the sticks” 9 miles from the nearest town and 7 miles to the nearest highway, our business attracted customers from far & wide, eventually putting the shops ‘in town’ out of business.  Why? 1. Selling top-quality products at reasonable prices.  2. Standing behind those products and taking care of our customers.  3. Service, Service, Service.  Dad taught me that to repair something, you first have to understand how it works, and then figure out why it broke and try to fix it so it didn’t fail again. We were constantly coming up with improvements for various products we sold. Our “return” rate (equipment that came back in after we had worked on it, because it wasn’t repaired properly) was staggeringly low…this was, I’m sure, the main reason our reputation kept attracting customers from further & further away.  I have carried this philosophy with me: If something is worth doing, it’s worth doing RIGHT.

I always gravitated toward the walk-behind tractors within Dad’s business; I had started working in Dad’s shop in 1980, when I was ten years old and by sixteen I was doing all the BCS sales & service in our family business. By eighteen I was General Service Manager for all equipment lines, managing up to 4 mechanics (2 were younger brothers…does that count?)

In 1993, I wanted to ‘spread my wings’ and have a business of my own. Dad said “Well, you might as well take over the BCS franchise…you’ve been doing it so long now that I don’t know how to sell them anymore…I just run ‘em!”

And so, in late 1993, my first business, Earth Tools & Goods was founded; my first shop was on a rented piece of land about 7 miles from Dad’s farm in Indiana.  I bought a couple of used semi-trailers, removed the axles and converted them into a shop.  My product offerings were BCS walk-behind tractors & implements and Dewit garden tools (branded at the time “De Van Koek”), which I had gotten into mainly to purchase a set of really good tools for myself!   I continued to raise most of my own food and kept the principles learned in Dad’s business: Treat your customers like you want to be treated, offer the best products you can find and keep prices reasonable by keeping overhead low (hence the semi-trailers) until you have saved enough to pay for improvements.  Going in debt was a no-no, and although I made it through the first winter on my own only by cashing in all the spare change I had saved up in tin cans as a kid to pay the bills, I stuck to it.    My business grew, and in late 1994 I met the woman who would change my life (hey-isn’t that too corny to put in here?).  In late 1997 we were married and in 1998 I moved to her family’s land in central Kentucky, selling my business in Indiana to a friend.   With walk-behind tractors still in my blood, I took on the then-defunct BCS franchise in Frankfort, KY and started Earth Tools Inc in a 16’x 24’ shed I built out of salvaged barn lumber.  My wife and I lived in a 10’x 15’ cabin for 4 years while we built our earth-bermed, slip-formed-fieldstone & concrete-retaining-wall, partial timber-framed (with salvaged lumber), partial straw-bale, partial cordwood, passive-solar-assist, off-the-grid house (whew!) on the side while I ran the business.   

AIN'T they just adorable?

We ran out of room in my little shop (and the neighbor’s shed, and my brother-in-law’s barn) after 3 years or so, close to the same time that I found I just couldn’t keep up with the growing workload.  So I took on a partner: Shannon Kington.  Shannon and his wife Carol had purchased equipment from me to run their small farm in Southern Kentucky, and were so thrilled with the way the equipment was constructed (Shannon had a lot of experience in machining and metalworking, so he recognized quality right away) and the way it performed that they wanted to get into trying to sell it right away in their community.  Unfortunately their local area was fairly economically depressed, so they couldn’t find buyers there…on the other hand, I was struggling to keep up with my growing business and needed help.  So they moved to Owenton and joined the business in 2002; it was Shannon & Carol who convinced me to put up a website, which eventually grew the business beyond what I’d ever thought possible.  We leased a barn and run-down little house on a neighbor’s property to move the business into in 2002, which approximately quadrupled our operating space.   Shannon has since retired (he was 62 when he joined Earth Tools) and we have continued to grow our staff as our business has flourished; we currently have 8 full-time employees (besides myself), 3 part-time, and 1 to 2 seasonal employees… and we ran out of space, too.  In 2006 we began construction of a new 7500 square foot facility, which was finally completed in 2008.  We incorporated several energy-efficient/green features into the building design. Click here for a full list of our “green” practices. As the business has grown, it has been an honor and privilege to have the wherewithall to donate a portion of our profits to causes and organizations we believe in... Click Here for a list of efforts we support.

Our family has grown as well; in 2003 Natalie was born, and in 2007 Sophie joined us (second one was a home-birth, something I now strongly recommend). The 900 square-foot house we built is getting tighter, but shoot - by Global standards, we have PLENTY of space!   We grow roughly a 1/3 acre organic garden…nothing like the market farm I grew up with, but enough to provide much of our food.  I LOVE gardening and if I had time I would do more…but I spend most of my time taking care of the equipment needs of market gardeners and homesteaders!  I guess the mechanic/salesman in me slightly outweighs the gardener….

We currently own a 1995 model BCS 850 with a 12hp gas engine (one of the ACME Italian engines; nearly the last one to come into the USA) on it, and this fulfills most of the equipment needs we have on our 180-acre property (to be fair: Most of our property is woods): It works the garden, mows the lawn (actually, I do more ‘gardening’ with the lawn-mower implement than anything else: all the grass clippings from the lawn go directly on the garden as mulch, acting as a weed barrier, moisture retainer, organic-matter addition and instant nitrogen boost), runs a brush mower, chipper/shredder, dozer blade for snow and gravel driveway maintenance and digs our potatoes with a root digger plow.  We did pick up a second machine (used)…an old BCS 735, which I got because it was equipped with a rare (rare on a BCS, anyway) synchronized PTO unit and coupled with a driven-wheel trailer, making it a 4-wheel-drive utility vehicle that will carry a ton.  We call this rig “The Blue Mule” and basically it is our farm truck. (Currently, only the Grillo brand tractors we sell have this option. BCS no longer produces a synchronized PTO unit.)

Joel with an 853 diesel and 31" brush mower.

As this Country, and indeed the World, comes to grips with the resource-extraction limits, pollution limits, and the true economic realities of the present time, this type of small-scale, highly efficient, high-quality, multi-purpose equipment is only going to make more sense.  I believe we need a food supply system in this Country based on locally-grown food, not based on cheap petroleum and its ability to get food from where in can be produced with the cheapest labor to the consumer.  This type of equipment enables very small-scale farms to operate profitably with relatively minimal investment in new, high-quality goods (compared to conventional 4-wheel farm tractors) and therefore I believe in what we’re doing and providing here.  I enjoy working with the folks who are working to put this kind of food system in place.   I enjoy, and commiserate with, the homeowner who is tired of the junk put out by most “lawn & garden” equipment manufacturers and wants something built well enough he/she can hand it down to the next generation.

So, thanks for reading, and thanks for your business, if you choose to give it to us; whether it be a tractor and implements you purchase, a spare part to keep an old machine going or just a darn good shovel or hoe.

Y’all take care,
(I learned that in Kentucky!)

Joel Dufour

Our Employees and Facility

Eric Cooper, Warehouse Assembly / Tech Manager Dennis Berry, Inventory & sales.   Earth Tools main warehouse. Jarrod Allnut, Warehouse Assembly / Tech   Casey Sterr, Office / Accounts Manager. David Hosey, Service Manager.   Earth Tools main building... note the 1990 Honda Civic wagon Joel keeps alive. Earth Tools second building (still under construction as of Jan. 2012) --This will house a metal fabrication shop, a new showroom, and lots of additional warehouse space.   Brad George, shipping dept...We tried to make Brad "shipping manager" but he informed us that "manager sounds White collar!!  I'm a BLUE COLLAR guy!"  He then informed us that we could call him the "Shipping Troll". OK, if you insist... Kevin Gordon, warehouse / assembly tech.   Adam Davis, Service tech ....and sales, and parts, and the "default IT guy", and comic relief (also Joel's department... but people only laugh at Joel's jokes because he's the boss) Eric Cooper and Berea Ernst preparing a tractor & implement for shipping... Berea is a seasonal employee.   Harold, the R&L truck driver (not an employee, but here daily) Last, but not by any means least, "The Big Guy," Chris Asbeck, Sales.     Wally the Shop-Cat...Wally is a Polydactyl (also called 'Hemmingway") Cat, which means he has extra toes.  He also LOOOVES attention!

EARTH TOOLS, Inc.
1525 Kays Branch Road
Owenton, KY  40359

(502) 484-3988 tel.
(502) 484-3357 fax.
 

NOTE REGARDING HOLIDAY CLOSINGS:

  Annual Winter vacation Dec. 24th,  re-open Jan. 2nd, 2013.
Also closed Memorial Day, July 4th, Labor Day and Nov. 22nd & 23rd for Thanksgiving.

small haybaler, small round haybaler, pine needle baler, pine  straw baler, small hay baler, small round hay baler, mini hay baler, mini round  hay baler, small hay bailers, small hay equipment, earthtools, earthtools.com, earthtool.com, earth tool .com, earth tool, earth tools, earths tool,  bcsamerica.com, bcs dealer, bcs tiller, bcs mower, sickelbar mower, sickel bar  mower, bcs sicklebar, garden tools, de wit, dewit, devankoek, de van koek, hand  forged garden tools, half moon hoe, diamond hoe, stirrup hoe, occilating hoe,  shw tools, dutch tools, dutch garden tools, dr fields and brush mowers, dr  mowers, small hay rake, mini hay rake, pine needle rake, pine straw rake, caeb,  caeb haybaler,  caeb baler, two- wheel tractor, hand tractor, two- wheel haying  equipment, 2-wheel haying equipment,2-wheel hay equipment.  two-wheel hay  equipment, walk behind baler, walk behind hay baler, molon hayrake, molon rakes,  berta rotary plow, berta, rotary plow, walk-behind, walk behind, gravely rotary  plow, mini-tractor, bcs tractor, bcs walk behind tractor, bcs 2-wheel tractor,  bcs two-wheel tractor, two wheel tractor, bcs 2 wheeltractor, bcs rototillers,  reartine tiller, rear-tine tiller, rear tine tiller, bcs reartine tiller, bcs  rear-tine tiller, bcs rear tine tiller, bcs haybaler, bcs hay baler, bcs baler,  bcs mini baler, bcs mini haybaler, bcs mini hay baler, bcs mower, bcs walk  behind mower, bcs walk-behind mower, bcs roto tiller, bcs roto-tiller, bcs  engine, engine for bcs, bcs motors, motor for bcs, bcs replacement engine,  replacement engine for bcs, bcs tiller engine, bcs rototiller engine, engine to  fit bcs, bcs tiller/ bcs rototiller/ bcs reartine tiller, motor to fit acme  engines, acme motor, acme parts, parts for acme engine, parts for acme motors,  parts for acme motor, acme motor parts, bcs parts, bcs tiller parts, acme motor  parts, bcs parts, bcs parts, bcs tiller parts, bcs rototiller parts, bcs engine  parts, bcs motor parts, small baler, rouge hoe, walk-behind haying equipment,  walk behind haying equipment, italian two wheel tractor, brush mower, heavy duty  mower, field and brush mower, small bush-hog, walk-behind brush mower, walk  behind brush mower, 2-wheel brush mower, two wheel brush mower, walk behind  bushhog, Dr field and brush mower, Dr mowers, Dr equipment, BCS tiller, BCS  tillers, BCS rear tine tiller, BCS rototiller, hula hoe, hula-hoe, grillo  tractor, grillo walk-behind tractor, grillo italy, Grillo S.p.A., Grillo  tillers, mainline rotary tillers, mainline tillers, mainline 2-wheel tractors,  mainline walk behind tractors, mainline two wheel tractors, hanseeder, hanjd seeder, hand-seeder, handseeders, hand seeders, hand-seeders, swanneck hoe, swan neck hoe, swan-neck hoes, rogue hoes, riciprocating spader, reciprocating spader, spaders, flailmower, flail mower, walk-behind spader, walk behind spaders, walk behind flailmowers, walk behind flail mowers, small snow blade, snow blower, power wheel barrow, power wheelbarrow, walk behind bedshaper, walk-behind bedshaper, bed shaper, rotary plows, bahco tool, bahco tools, bahco pruners, bahco lopers, bahco snips, agrigarden machine, sustainable ag equipment, sustainable agriculture movement, organic gardening equipment, acme waterpump, acme water pumps, acme pump, acme pumps, scout pumps, scout pump, drop pump, drop pumps, acme scout pump, acme drop pump, acme pump parts, acme water pump parts, grillo; grillo walking tractors;grillo walking tractor, BCS walking tractors; BCS walking tractor; grillo equipment; grillo agrigarden machines;  grillo tractors; grillo 2-wheel tractors; grillo 2-wheel tractor;  grillo two-wheel tractors, grillo two-wheel tractor