Pressure Washer


FINALLY! We now offer an AC electrical generator implement for BCS and Grillo walk-behind tractors. The brushless alternator unit is made by MeccAlte, a reputable Italian manufacturer (the same one Northern Tools buys all their alternators from) and it features a spiral-rotor design which provides “cleaner” power for electronic devices (NOTE: If you are operating computer equipment from a generator, it’s still a good idea to have a power strip with an electrical “filter”). Power rating: 5200 watt continuous / 6000 watt surge, 120 / 240 volts AC. Equipped with a 20 amp 120 volt duplex recepticle (two plugs) and a 30 amp L-14-30 120 or 240 volt 4-prong twist-lock recepticle, two circuit breakers and a volt-meter.

For proper operation, simply increase the throttle speed of your tractor engine until the volt-meter reads the proper voltage (nearly full throttle is needed, like any standby generator). Running at partial throttle will result in voltage and frequency that are too low, and can damage your appliances. Although the price of this generator is close to what you’d pay for a standby generator with an engine, the clear advantage here is that by operating this implement off your walk-behind tractor PTO, you don’t have another engine sitting around that you have to worry about (stale fuel, etc.).

Needs a 10hp gas engine minimum for full wattage output (can be run by a smaller engine, but the engine will bog down before full power output in achieved…for example, with an 8hp engine, about 4000 watts can be produced; with a 6hp engine, 3000 watts).

Available to fit BCS or Grillo machines; Grillo model G131 requires a PTO adapter.

  • Price: $1029 $949